Die Cutting Silicone Sponge Gasket Sheet for Seals, Press Pads, Thermal Insulating
Product Description
Commercial grade silicone sponge sheet is designed for high performance gasket, thermal shielding, vibration mounts and press pads. Silicone exhibits a wish list of characteristics including superb chemical resistance, high temperature performance, good thermal and electrical resistance, long-term resiliency, and easy fabrication. It also possesses excellent UV and ozone resistance. Silicone is odorless, tasteless and non-toxic. Silicone sponge rubber is most commonly red in color although it is also available in grey, black or white with a fine fabric finish on both sides.
Features
- High temperature resistance.
- Chemical, ozone and UV resistant.
- Low compression set and easy fabrication.
Datasheet
Property |
Specification AMS3195 |
Typical Values |
Density, lbs/cubic in. under ¼” thk. |
.025 Max |
.020 |
Density, lbs/cubic in. over ¼” thk. |
.020 Max |
.018 |
Compression Deflection, PSI |
6-14 |
11 |
Compression set, 22 hrs @212°F |
60% Max |
29 |
Brittle Point °F |
-67 |
-103 |
Temperature Range °F |
N/A |
-103 to +450 |
Water Absorption |
5% Max |
Pass |
Tensile Strength, PSI |
N/A |
100 |
Elongation % |
N/A |
200 |
Thermal Conductivity BTU in./hr. ft² ºF |
N/A |
6 |
Applications
- Gasket applications that require a soft compressible material.
- Seals, press pads, thermal insulating, thermal shielding, heat transfer.
- Silk screening, print presses, and vibration mounts.